Drill 7,54X143/183 IK HM 5.1764
Stock
{{StockInfo.NotAllowedReason}}
{{stck.StockInfo.RemoteStockLocation.DisplayName}}
{{stck.StockInfo.RemoteStockLocation.Amount|number}} {{stck.StockInfo.RemoteStockLocation.Uom}}
({{stck.StockInfo.RemoteStockLocation.DeliveryTimeTxt}})
{{stck.StockInfo.CentralStockLocation.Amount|number}} {{stck.StockInfo.CentralStockLocation.Uom}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(In stock)
{{stck.StockInfo.CentralStockLocation.DisplayName}}
(Not in stock)
{{stck.StockInfo.CentralStockLocation.DeliveryTimeTxt}}
[{{stck.StockInfo.PrimaryStockLocation.DeliveryTimeTxt}}]
{{stck.StockInfo.NotCentralStockDeliveryTimeMsg}}
{{stck.StockInfo.SecondaryStockLocation.DisplayName}}: {{stck.StockInfo.SecondaryStockLocation.Amount|number}} {{stck.StockInfo.SecondaryStockLocation.Uom}}
Special return conditions
Product description
Type no.:
LM no.:
Own product no.:
9517640075400
4007700204
-
Discount code:
UNSPSC Code:
Customs code:
4022090956206
27111509
82075050
SuperV-drill with internal coolant
Spiralized deep hole drill for high-efficient manufactoring of holes <15xD in steels and cast iron.
* rigid flutes for highest feeds and speeds
*special flute geometry for optimized chip-flow.
* oil holes with maximum cross-section for optimal lubrication supply.
Requirements/Recommendations:
* initial milling of surface. The surface must be machined at right angles to the entry of the drilling operation.
* production of a cylindric pilot hole with a minimum depth og 1xD. We recommend our SuperV-drill type U or VA.
* entry in pilot hole at a speed of approx. 300 rev/min. and with a feed rate of approx 500 mm/min.
*setting of coolant preassure and speed.
* continious drilling to complete hole depth w/o drawing
* for through holes with oblique exit, reduce the feed rate vf to 40% approx. 1 mm prior to breakthrough
* after reaching hole depth stop machine spindle and coolant supply withdrawal in top gear.
| Brand | Stock |
|---|---|
| Characteristic | Internal cooling |
| Diameter (mm) | 7.54 |
| Drill depth | 15xD |
| Shank type | Cylindrical |
| Product Series | 5.1764 |
None